Energy Use Case 2:Balancing Power Supply and Demand

Remember how we talked about fighting power theft with Cortex? Well, that’s just one part of what it does. Balancing power supply and demand is also a crucial dilemma of energy industry. Now, imagine trying to keep a giant seesaw balanced, but instead of kids, you’ve got the power supply on one side and everyone’s demand for electricity on the other. Sounds tough, right? This post is all about how Cortex can keep everything in perfect harmony, making sure there’s always just the right amount of power to go around.
Pain Point: Balancing Power Supply and Demand
Difficulty in dynamically adjusting power supply and pricing in response to fluctuating demand, leading to inefficiencies and potential service disruptions.
Cortex Integration
- SCADA System: Provides real-time monitoring data on grid load and power plant output levels.
- Market Price Data Feed: Delivers current electricity market prices and trends.
- Pre-Trained Machine Learning Models: Utilized by Cortex for forecasting demand, pre-trained on historical load, supply data, and other influencing factors.
Data Feed to Cortex
- From SCADA System:
- Real-time grid load and power plant output data.
- Historical Data (Input): Past data on electricity demand, supply, weather conditions, and market prices to provide context for the AI model’s predictions.
- From Market Price Data Feed: Up-to-the-minute price of electricity in the market, which can influence demand.
- From Pre-Trained Machine Learning Models: Predictions of future demand based on real-time and historical data inputs.
Analysis
Cortex continually compares current grid load with the power supply from plants. It also uses outputs from pre-trained machine learning models to anticipate demand shifts. In order to optimize the power supply and demand, it combines all input to reach two results: Supply and Price adjustment.
Analysis – Supply Output Calculation
Determine Current Demand and Forecasted Increase
- Current Demand (CD): Measure the total current load on the grid.
- Forecasted Demand Increase (FDI): Obtain the predicted increase in demand from the AI model.
Assess Current Supply Capacity and Required Additional Supply
- Total Current Supply (TCS): Sum the current output from all power plants connected to the grid.
- Required Additional Supply (RAS): Calculate the additional supply needed to meet the forecasted demand increase.
- Formula: RAS=CD×FDI / 100
Identify Most Efficient Power Plants
- Efficiency Rating: Use a predefined efficiency rating for each plant, focusing on those with the highest efficiency (lower fuel cost per kWh, lower emissions, etc.).
- Selection: Select the top N most efficient plants that can be ramped up to meet the RAS.
Calculate Percentage Increase in Output for Selected Plants
- Available Capacity (AC): For each selected plant, determine the available capacity to increase output without exceeding safe operational limits.
- Distribute RAS Among Selected Plants: Allocate the RAS among the selected most efficient plants based on their AC.
- Percentage Increase (PI): Calculate the percentage increase in output required for each selected plant to contribute to meeting the RAS.
- Formula: PI=(Individual Plant’s Contribution to RASCurrent Output of Plant)×100PI=(Current Output of PlantIndividual Plant’s Contribution to RAS)×100
Implement Output Adjustment
The last step is to apply the outcomes of adjsutment factors to the output.
Analysis – Price Calculation
Demand Thresholds
- High Demand Threshold (HDT): The level of demand at which prices need to be increased to discourage excessive use and prevent overload.
- Low Demand Threshold (LDT): The level of demand at which prices can be lowered to encourage more usage and optimize grid efficiency.
Calculate Current Demand Level (CDL)
- Formula: CDL=Current Total Load / Total Grid Capacity ×100
- This formula gives the CDL as a percentage of the grid’s capacity, indicating how much of the grid’s potential is being utilized at any given moment.
Determine Price Adjustment Factor (PAF)
- For High Demand (CDL > HDT): The PAF could be calculated based on how far the CDL exceeds the HDT, possibly including a scaling factor to ensure the price increase is proportional and reasonable.
- For Low Demand (CDL < LDT): The PAF might decrease prices to a minimum threshold to prevent prices from dropping too low, ensuring the utility’s costs are still covered.
Calculate New Price (NP)
- Formula for High Demand: NP=Current Price×(1+PAF)NP=Current Price×(1+PAF)
- Formula for Low Demand: NP=Current Price×(1−PAF)NP=Current Price×(1−PAF)
- These formulas adjust the current electricity price based on the PAF determined by the current demand situation.
Implement Pricing Adjustment Protocol
- If CDL > HDT, increase prices as per the calculated NP.
- If CDL < LDT, decrease prices as per the calculated NP.
- Maintain current prices if CDL is within acceptable thresholds to avoid unnecessary fluctuations.

Actions Initiated by Cortex
Operational Alerts for Power Plants
Specific instructions for power plants to adjust output, including which plants to ramp up or down and by what percentage, to meet the predicted demand, if automated adjustments are supported.
Pricing Adjustment Options
- Sending an alert to the pricing team with the recommended new price (NP), including the rationale (high or low demand) and the expected impact.
- If integrated with automated pricing systems, Cortex can initiate a price update process, subject to confirmation or automated rules set by the utility.
Potential Benefits
- Increased Grid Stability: Dynamic adjustments to power supply and demand help maintain grid stability and prevent outages.
- Improved Economic Efficiency: Optimizing electricity production and pricing in real-time reduces operational costs and can increase revenue during peak demand periods.
- Enhanced Responsiveness to Market Conditions: Ability to quickly adjust pricing in response to real-time market conditions and demand forecasts ensures competitive positioning.
Example Scenario – Power Supply and Demand
On a hot afternoon, a pre-trained AI model forecasts a 25% surge in electricity demand, primarily due to increased air conditioning use. The energy company needs to balance the power supply and demand. Current Demand (CD): 4000MW & Total Current Supply (TCS): 4500 MW
Cortex’s Analysis:
- Demand Increase Prediction:
- The AI model predicts a 25% increase in demand.
- Current Demand Level (CDL) Calculation:
- Before the spike, CDL is at 75% of Total Grid Capacity. With the predicted increase, the demand is expected to reach 100% (since 75%+25%=100%75%+25%=100%).
- High Demand Threshold (HDT) Check:
- The preset HDT is at 80%. Since the expected CDL of 100% exceeds the HDT, an adjustment is needed.
- Price Adjustment Factor (PAF) Calculation for High Demand:
- Assuming a direct correlation, a demand spike above the HDT necessitates price adjustment. Given the scenario, Cortex opts for a 7% price increase as a measure to moderate demand growth.
- New Price (NP) Calculation:
- If the current price is $0.10 per kWh, the new price would be calculated as NP = $0.10 X (1 + 0.07) = $0.107 per kWh, rounded as needed for consumer billing.
- Output Increase Calculation:
- CD: 4,000 MW, FDI: 25%, TCS: 4,500 MW
- Required Additional Supply (RAS)=4,000×25%=1,000 MW
Cortex’s Actions:
- Operational Alert: Cortex sends an alert to system, advising a 10% output increase to preemptively meet the forecasted demand spike.
- Pricing Alert: Cortex recommends a 7% increase in electricity prices to help curb the spike in demand, ensuring the adjustment is clearly outlined and justified based on real-time data and forecasts.
Result:
The proactive adjustments—a 10% increase in power output and a 7% hike in electricity prices—effectively balance the surge in demand with available supply. This strategic response ensures that the balance between power supply and demand is met without overtaxing resources, thereby maintaining grid stability and operational efficiency. Simultaneously, the moderated demand through price adjustments helps manage the grid load more effectively, demonstrating Cortex’s capability to dynamically balance supply and demand in real-time energy markets.

Conclusion
Balancing power supply and demand isn’t just a nice-to-have; it’s essential for keeping everything running smoothly and avoiding blackouts. With Cortex, energy companies have the potential to be really good at this balancing act, which means better service for everyone. When you put this together with the fight against power theft we talked about before, it’s clear: Cortex can change the game for how we get our electricity. It’s pretty exciting to think about what’s next on the horizon for energy tech.
Try Cortex for free and experience the power of real-time processing yourself.
One thought on “Energy Use Case 2:Balancing Power Supply and Demand”
Comments are closed.